Cap for HP/Canon Tanks - Dual Fit for Regular and Large tanks

Canon BCI-3 BK CMY, PGI-5 BK, Canon CLI-8 BK, CMY, R, G, PC, PM, Canon CLI-221 , BK, CMY, GY, HP 564/564XL BK, CMY, HP 920/920XL CMY

The Canon Ink Port Cap fits over the ink exit port to protect it against damage and leaking during transportation.

Check out our cartridge id labels, remove label, plugs, and ink

Cap for HP/Canon Tanks - Dual Fit for Regular and Large tanks

Canon BCI-3 Bk CMY, PGI-5 Bk, Canon CLI-8 BK, CMY, R, G, PC, PM, Canon CLI-221, BK, CMY, GY, HP 564/564XL BK, CMY, HP 920/920XL CMY

The Canon Ink Port Cap fits over the ink exit port to protect it against damage and leaking during transportation.

Check out our cartridge id labels, remove label, plugs, and ink

Ball Plug used in HP 10 (C4843A), 88 (C9385AN), 940 (C4902AN), 564 (CB318WN), 920 (CD971AN), Canon CLI8, BCI3, PGI5 series, and with the Epson Valve Plugs.

This Plug is used in the HP 564XL, 920XL and Canon CLI221, CLI8, BCI3, PGI5 PGI220 cartridges. An 18g or smaller needle is injected and removed through the plug, allowing the cartridge to be refilled while upside-down, as recommended.

The Canon refill kit includes the necessary items and complete instructions to hand fill the Canon BCI-3, BCI-6, PGI-5, CLI-8. Additional items are recommended to fill the PGI-220/225 and CLI-221/226.

Kit includes: 6 - Small Caps, 6 - Large Caps, 1 - 20cc Syringe, 1 - 1.5 Sharp Needle, 20 - Ball Plugs, 1 - Ball Plug Pusher, 1 - Instruction Sheet

The CaBox Maxi Canon Refilling Kit refills Canon BCI 3E Black, BCI 3 Color, PGI 5, and CLI 8 Series Cartridges in less than 1 minute without a drill! The CaBox Maxi can fill one BCI 3 or PGI 5 Black and color cartridges at the same time.

Watch a short product video here and call your R-Jet Tek Representative Today!

The CaBox Maxi Upgrade is used to fill the Canon CLI221/220 using the CaBox Maxi Canon Refilling Kit  which also refills the Canon BCI3E, BCI3 Color, PGI5 and CLI8 Series Cartridges in less than 1 minute without a drill!

Watch a short product video here and call your R-Jet Tek Representative Today!

The EPBox refill kit will simplify and speed up the process of filling Epson T0711-14 & T0801-6, T069 and T078 series cartridges. This includes 7 and 9 pin cartridges.

After the cartridge in placed it the EPBox jig, a hole is made in a precise location through the side of the cartridge, the cartridge is then turned over and filled through the hole made by vacuum. Tape the hole made in the side, use #3210 to reset the chip and finished.