A
comprehensive package of equipment and tools designed to get
your business up, running and profitable – within your budget.
|
SelectJet Designed
for retail and franchise operations, the SelectJet machine offers
affordable versatility. It allows the operator to fill up to four
different color cartridges without changing ink supply lines as well
as four black cartridges. R-Jet Tek has added a new High Speed pump
to fill black cartridges faster than ever before. An onboard vacuum
pump eliminates the need for an air compressor.The Rotary Selection
Valves and Universal Remote Vacuum Chamber allows filling your choice
of cartridge with the specific required ink.
To fill a cartridge, the
timers are set to fill a specified amount of ink, needles are inserted in to the cartridge,and the "start" button is pushed. A
high quality, low noise electric pump produces vacuum and the cartridge
is automatically filled with the correct amount of ink. These pumps
have a reverse mode to pull the ink back out of the lines before
switching ink, eliminating waste.
| This
package also includes these professional tools: |
| |
|
|
|
CentraSpin II D/S The CentraSpin II D/S (dual speed Low/High)
performs 2 primary functions and is an integral step in processing
cartridges. Using centrifugal force, it empties the old ink and liquids
from the cartridge. When injected with de-ionized water or OCP rinse,
printhead nozzles are flushed. Using the CentraSpin II/DS is very
easy. Simply choose low or high speed, then place cartridges onto
flex platter at the bottom of the drum, cover the cartridges with
a flex platter and spin. CentraSpin II D/S #9334 |
Universal Flush System
|
|
|
|
JetPro XP Atomizer The
JetPro XP, a manual printhead- cleaning machine designed to spray
atomized water droplets under pressure. The JetPro XP is used to
clean cartridge printheads and or any other part of the cartridge.
The operator simply directs the atomized water mist toward the part
of the cartridge that needs to be cleaned. The JetPro XP will clean
the area or loosen any dried particles in the printhead nozzles.
The JetPro XP was designed to draw de-ionized or reverse osmosis
water in from a container, the water is then heated in the onboard
water heater and forced through the atomizer to form and release
droplets of atomized water. This is the optimum way to clean the
printhead nozzles without causing damage. JetPro
Atomizer #1112-110
|
|
Print
This Page
Email
Page