C122-C is manufactured in Germany to give the sharpest and brightest OEM quality images for Canon cartridges including CLI-36 C, CLI 36 C, CLI36 C, CLI-8 C, CLI 8 C, CLI8 C
C122-D is manufactured in Germany to give the sharpest and brightest OEM quality images for Canon cartridges including CLI-36 C, CLI 36 C, CLI36 C, CLI-8 C, CLI 8 C, CLI8 C
C122-E is manufactured in Germany to give the sharpest and brightest OEM quality images for Canon cartridges including CLI-36 C, CLI 36 C, CLI36 C, CLI-8 C, CLI 8 C, CLI8 C
C122-F is manufactured in Germany to give the sharpest and brightest OEM quality images for Canon cartridges including CLI-36 C, CLI 36 C, CLI36 C, CLI-8 C, CLI 8 C, CLI8 C
C122-G is manufactured in Germany to give the sharpest and brightest OEM quality images for Canon cartridges including CLI-36 C, CLI 36 C, CLI36 C, CLI-8 C, CLI 8 C, CLI8 C
C122-H is manufactured in Germany to give the sharpest and brightest OEM quality images for Canon cartridges including CLI-36 C, CLI 36 C, CLI36 C, CLI-8 C, CLI 8 C, CLI8 C
Ink Port Caps fit over the ink exit port on the cartridge to protect it against damage and leaking during transport. These caps fit Canon BCI3/6/CLI18/221/PGI5/220/221/225/226 and Hewlett Packard HP564/564XL/920/920XL
This Plug is used in the HP 564XL, 920XL and Canon CLI221, CLI8, BCI3, PGI5 PGI220, PGI225, PGI226 cartridges. An 18g or smaller needle is injected and removed through the plug, allowing the cartridge to be refilled while upside-down, as recommended.
The Canon refill kit includes the necessary items and complete instructions to hand fill the Canon BCI-3, BCI-6, PGI-5, CLI-8. Additional items are recommended to fill the PGI-220/225 and CLI-221/226.
Ball Plug used in HP 10 (C4843A), 88 (C9385AN), 940 (C4902AN), 564 (CB318WN), 920 (CD971AN), Canon CLI8, BCI3, PGI5 series, and with the Epson Valve Plugs.
This needle tipped solder iron helps to remove the plastic ball plugs from Canon/HP cartridges. Some of the newer model cartridges have a hard plastic plug that is difficult to remove. This iron is used to melt a hole in the plug, then either a plug remover Part #7067 or a drywall screw is inserted in the hole to pry the plug out. Complete instructions can be found in our hand refill kit #3264 or #3264K.
Canon 3-in1 Multi Chip Resetter for PGI 5, PGI 220, PGI 225, CLI 8, CLI 221, CLI 226. Uses USB connector as power connection.
This resetter is capable of identifying non-US chip versions and will reprogram to US chip version. This resetter re-programs to "US version cartridges only"!