|
|
Press Release
FOR IMMEDIATE RELEASE
CONTACT: Mike Warner, VP/GM
TELEPHONE: 719-578-0506
R-Jet Tek Introduces Ball Plugs for HP2000 Printer Cartridges
Colorado Springs, CO --- R-Jet Tek is pleased to announce the immediate availability of a replacement ball plug to be used in the Hewlett Packard 2000 and 2500 ink jet printer cartridges. The HP#10 or 4800, 4841 modification to its popular Fluidix WorkStation 12. The primary change was to remove and no longer offer the on-board air compressor. An external air hookup is now necessary. The next was to offer as standard the automatic cartridge pressurization on two of the four fill stations.
According to Mike Warner these product changes were brought about by customer recommendations. The Fluidix machines require only a small amount of air to operate and we found that most manufacturers already had an air compressor at their location and they didn't feel they needed one built into this machine.
Several customers also asked us to make two of the fill stations on the WorkStation 12 so they would automatically pressurize the HP26A, 29A rather than then current manual method. We felt these were excellent suggestions so we now include one auto-pressurization station as standard on the WorkStation 5 and WorkStation 6 and two on the WorkStation 12.
The WorkStation 12 was introduced in late 1998 for the high volume and franchise locations that wanted one machine that could be set up to fill the popular HP51626/29A, 40/45, Canon BC02 and Lexmark 1380620 without having to change inks or cartridge cradles.
. The WorkStations 5 and 6 were introduced in May of 1999 to meet the smaller production requirements while offering the full cartridge cleaning and filling functionality.
The WorkStations have proven to be extremely popular machines because the customer can clean, evacuate and fill the popular HP51626/29A, 40/45, Canon BC02 and Lexmark 1380620.
For further information contact Mike Warner at 719-578-0506
|
